Moon Kitchen 2.0

Moon Kitchen 2.0
Moon Kitchen 2.0
Moon Kitchen 2.0
Moon Kitchen 2.0
Moon Kitchen 2.0
Moon Kitchen 2.0
€0.00
Tax excluded


The price has not changed in the last 30 days.

Realization

Lead time currently is about 13-15 business days + delivery.
In the event of increased interest, lead times may be extended.

Description

Moon Kitchen 2.0 with a 25-year guarantee.

The bolt-on aluminum construction, adjustable rear walls, and 5 independent modules will allow you to build an exclusive van-life kitchen, no matter what kind of van you have. Thanks to the patented solutions, the Moon Kitchen 2.0 has become the world's first kitchen to fit most vans, boats, houses on the water, barges, etc. The finish of the fronts, the many options for installing cookers, sinks, or fridges, and the five independent modules that can be connected in any configuration, give you almost unlimited possibilities to build exactly the kitchen you are looking for.

Which cars will Moon Kitchen 2.0 fit?

Citroën Jumper / Relay/ from L1 to L4H3 / 1994- present
Ford Transit IV- VI / Tourneo I, II / Transit Pro/ from L1 to L4 / 1986 - present
Mercedes-Benz SprinterI I-III / Freightliner, W903, W906, W907, W910/
od L1 to L4 / 1995- present

Mercedes-Benz Vario / 1996- 2013
Fiat Ducato I-III / e-Ducato, Ram ProMaster/ from L1 to L4 / 1981 - present
Opel Movano I-III / Vauxhall Movano, Movano A,B,C, Movano-e/ from L1 to
L4/ 1998 - present

Iveco Daily I-IV / Alfa Romeo AR8, Fiat Daily, Zastava Rival, Pegaso Daily,
Zastava New Turbo Rival /od L1 to L4/ 1978 - present
Peugeot Boxer I-IV / Manager/ from L1 to L4 / 1984 - present
Volkswagen Crafter I-IV / LT3, e-Crafter / from L1 to L4 / 2006 - present
Volkswagen LT I-II / 1975 - 2006 /
Nissan Interstar I-II / NV400, Interstar-e / from L1 to L4/ 2002 - present
Renault Master I-IV / Messenger / from L1 to L4/ 1980 - present
Chevrolet Express / 1995 - present
GMC Savana / 1995 - present

Moon Kitchen 2.0 | Kitchen for campervan

A set of aluminum kitchen furniture for self-assembly, with a 25-year guarantee, which you will install in almost any campervan, campervan, sailboat, boat, or houseboat.

Mercedes
VW
Ford
MAN
Citroen
Fiat
RAM
Peugeot
Renault
Opel
Nissan
Mercedes
VW
Ford
MAN
Citroen
Fiat
RAM
Peugeot
Renault
Opel
Nissan

The bolt-on aluminum construction, adjustable rear walls, and 5 independent modules will allow you to build an exclusive van-life kitchen, no matter what kind of van you have. Thanks to the patented solutions, Moon Kitchen 2.0 has become the world's first furniture set that will fit most vans, boats, houses on the water, barges, etc. The finish of the fronts, the many options for installing cookers, sinks, or fridges, and the five independent modules that you can combine in any configuration give you almost unlimited possibilities to build exactly the kitchen you are looking for.

Example configurations:

Moon Kitchen 2.0  |  100 cm

Modules 65 + 35 in Dark Grey with blue textile front finish. A version with a cargo drawer, in this case for storing the clean water tank.

Moon Kitchen 2.0  |  105 cm

Modules 65 + 40 in Green Dawn and oak veneer fronts. The washbasin is placed on the right side of module 65, which is equipped with a cargo drawer and an external table.

Moon Kitchen 2.0  |  130 cm

In modules 65 + 30 + 35, the choice was between a drawer and shelf with a hinged door in module 65, a drawer and shelves in module 30, and a full door with three shelves in module 35.

Light and armored

We use a corrosion-protected aluminum alloy with high fatigue strength, ductility, and bendability, with a thickness of 1 to 2 mm, to produce furniture. Design starts in the latest version of Solid Works software, laser cutting, and bending are controlled by precision monitoring and measuring equipment, so the fit of the components has a tolerance of less than 0.7 mm.

The assembly of our furniture is a pleasure

Moon Kitchen 2.0 is a furniture set for self-assembly. The precision of the construction elements makes it easy to assemble any module in less than 2 hours with basic assembly skills. To assemble a module, all you need is a screwdriver/driver, a socket spanner, and an Allen. Sometimes a protractor is also useful. Many components, such as guides or reinforcements, have already been partially assembled in our factory.

Silence on board

There is nothing worse than creaking furniture in a car, boat, or barge. We understand this very well, which is why all aluminum joints in the Moon Kitchen 2.0 furniture have been isolated using special fabric seals. This solution not only dampens but also improves the flexibility of the furniture, which is exposed to overloading, tilting, and vibrations

We can assemble it for you.

If you don't have the time or don't feel like to assemble your Moon Kitchen 2.0, don't worry - we can do it for you! We will bolt together your chosen configuration, secure it, and ship it on a pallet*, according to your instructions.

*Pallet shipping costs are priced individually depending on the destination address.

Adjusting the rear walls. Seemingly simple, but we're the only ones who have patented it.

Changing cars? Take your furniture with you!

The rear wall of the Moon Kitchen 2.0 modules is adjustable*. This is a clever solution that will allow you to put the module where you want it, without worrying about overstuffing, bulkheads or reinforcements in the vehicle. The 4.5 cm adjustment will allow the kitchen to fit the sides of almost any vehicle, boat or barge. 

*Only in Module 65 the rear walls are not adjustable.

Adjusting the rear walls. Seemingly simple, but we're the only ones who have patented it.

Changing cars? Take your furniture with you!

The rear wall of the Moon Kitchen 2.0 modules is adjustable*. This is a clever solution that will allow you to put the module where you want it, without worrying about overstuffing, bulkheads or reinforcements in the vehicle. The 4.5 cm adjustment will allow the kitchen to fit the sides of almost any vehicle, boat or barge. 

*Only in Module 65 the rear walls are not adjustable.

Recyclable furniture

Created primarily from high-quality aluminum, steel, and wood, Moon Kitchen will last for years. But when disposed of, 99% of the materials can be recovered or recycled without leaving an unnecessary carbon footprint.

Recyclable furniture

Created primarily from high-quality aluminum, steel, and wood, Moon Kitchen will last for years. But when disposed of, 99% of the materials can be recovered or recycled without leaving an unnecessary carbon footprint.

Taking it apart

Quick access

We produce Moon Kitchen 2.0 every day. Many variants are available off-the-shelf. The average lead time for individual modules should not exceed 5-10 days.

Designed for hard work

Moon Kitchen 2.0 is a bolted, insulated special seals piece of furniture with unrivaled durability. We are confident in this product, which is why we offer a guarantee of up to 25 years on the construction.

Tailor-made furniture

The modular construction allows you to arrange the space in your car, boat, yacht, and houseboat from 30 cm in width indefinitely.

Everything under the colour.

Moon Kitchen 2.0 is part of the entire Van Der Moon furniture system. Therefore, all our products will be available in similar color variants. The Moon Kitchen is now available in 4 colors*. The thermosetting powder paint we use to varnish the entire structure is extremely resistant to impact, abrasion, moisture, UV radiation, or temperature changes. The entire painting process takes place in the Vitberg/Van Der Moon factory, under strictly controlled conditions with full safety guarantees for the operator.

* Dark grey - RAL 7021
   Écru - RAL 9001
   Green Dawn - RAL 7033
   Dark Nut Brown - RAL 8028

Pick and choose.

Decide for yourself which fronts you want. 

Upholstered - the front trims are made of lightweight plywood, upholstered with waterproof material with high resistance to abrasion. They can be cleaned using common cleaning products without chlorine, alcohol, or added solvents. It is an elegant, soft, and pleasant-to-the-touch finish for kitchen fronts. Available in all Van der Moon colors, they will go perfectly with the Moon Box and Moon Organiser.


Wooden - we made these by gluing together natural oak veneer with lightweight plywood. The whole has been painted three times with yacht varnish.

A professional metal lever lock was used to close the fronts, combining durability and strength, guaranteeing solid protection against accidental opening. It is only available in black.

1643

kitchen configurations

Moon Kitchen 2.0 is our most durable and versatile kitchen for a van, yacht, boat, barge, or house on the water. It enchants with its versatility and build quality. We have designed it to fit into many interiors.

In addition to the construction colours and front finishes, the 55, 40, 35 and 30 cm Modules have a choice of different configurations and functionalities. You can configure each Module independently of the others, and the possibility of configuring the whole is really impressive. When creating the individual Modules, we thought about the fact that you can change the layout of your cabinets at any time. Today you need three drawers, tomorrow you will need a whole door with three shelves. You don't have to replace the entire cabinet - just order the shelves and door and you will have the same cabinet, either with drawers or shelves as you wish. Likewise with doors to the right or left side. 

Choose 3 drawers.

Choose a flap and two drawers.

Choose a flap and two shelves with doors opening to the right side.

Choose a flap and two shelves with doors opening to the left.

Choose a drawer and two shelves with doors opening to the left.

Choose a drawer and two shelves with doors opening to the right.

Choose three shelves with doors opening to the left.

Choose three shelves with doors opening to the right side.

Our worktops are always at the top

We made the worktop by gluing together a natural oak veneer, a sheet of aluminum, and plywood, and applied three coats of yacht varnish to the whole. The result? Unprecedented durability and outstanding design. 

In modules 65, 55, 40, and 35 you will install a sink. In the 65 modules, you can have it either on the right or the left. The sink in the module requires the installation of a hinged door directly under the countertop. This gives you access to the space between the sink and the walls of the Module. Each of our sinks can be closed with a veneer lid. The sink is supplied complete with a siphon. 

Our worktops are always at the top

We made the worktop by gluing together a natural oak veneer, a sheet of aluminum, and plywood, and applied three coats of yacht varnish to the whole. The result? Unprecedented durability and outstanding design. 

In modules 65, 55, 40, and 35 you will install a sink. In the 65 modules, you can have it either on the right or the left. The sink in the module requires the installation of a hinged door directly under the countertop. This gives you access to the space between the sink and the walls of the Module. Each of our sinks can be closed with a veneer lid. The sink is supplied complete with a siphon. 

Module 65 with sink on the left-hand side of the worktop

Module 65 with sink on the right-hand side of the worktop

Module 55 with sink

Each module has its own top. When the modules are connected to each other, the tops fit tightly together, leaving a technical micro-gap. This is necessary so that the tops can work against each other while the vehicle is in motion. We coat the tops three times on each side, so even if a little moisture gets into the gap, the tops are still safe.

Each module has its own top. When the modules are connected to each other, the tops fit tightly together, leaving a technical micro-gap. This is necessary so that the tops can work against each other while the vehicle is in motion. We coat the tops three times on each side, so even if a little moisture gets into the gap, the tops are still safe.

Module 40 with sink

Module 35 with sink

Module 30 without sink

Module 65

/Module 65 with refrigerator, cooker, sink, drawers, shelf/

Module 65 of the Moon Kitchen 2.0 product family is an innovative bolt-on kitchen module with space for a cooker, sink, fridge, additional table or cargo drawer, organizer, and folding waste basket. Made of 90 % high-quality resistant and lightweight aluminum. It has two recesses for under-counter drawers or shelves with drop-down doors. If you do not use the cargo drawer, you will be installing a free-standing refrigerator yourself with the following maximum dimensions: H: 56.1.0 cm D: 62.1 cm, W: 44.1 cm (not including the refrigerator's decorative flange). The module is available in two versions, for cars with loading doors on the right or left side of the vehicle (cars for the UK, AU, IN, ID, NZ markets).

Variants of Module 65

Worktop and sink

Module 65 is available with or without a top. The top is made of aluminum-reinforced plywood and finished with lacquered oak veneer. It is possible to install the sink on the right or left side of the module. The sink set does not include a mixer tap. 

Front variants

Module 65 is prepared for the installation of drawers or shelves with hinged doors, which are mounted in place of the sink to maximize the use of storage space. In addition, we have prepared the Moon Set textile organizers (described under accessories).

Cargo drawer

The Cargo drawer is a large drawer mounted on the right or left side of Module 65. It creates space for the installation of e.g. a touring fridge with maximum dimensions: B: 37.10 mm H: 44.60 mm L: 60.00 mm and a weight of up to 30 kg. Installing the refrigerator in the cargo drawer will allow you to use it both from outside and inside the car. The drawer is lockable with a strong lock that will not allow it to open, even when driving on difficult terrain. The cargo back is adjustable by +/- 15 cm, allowing you to adjust the space for the fridge to suit its dimensions.

Table

When module 65 is mounted in the door of your van, you gain an ideal place for an additional table for cooking outside (with the car's side door open). We made the table by gluing natural oak veneer to birch plywood. The whole thing was painted three times with yacht varnish.

Finishing

We prepared Moon Kitchen 2.0 in 4 construction colors: dark grey, ecru, green down, and dark nut brown. The fronts are available in wood or upholstered finishes in the colors of other Van Der Moon products (Moon Box and Moon Organiser) and oak veneer. All drawers and cabinets are secured with a special lock to ensure safety during travel.

Accessories

All Moon Kitchen drawers can be fitted with a Moon Pack, which is a drawer organizer with a quick unfolding system. Each Moon Pack has a handle, making it easy to pull out of the drawer and take to a picnic. In addition, Module 65 can be equipped with the Moon Pocket and Moon Bin, which are textile organizers for essentials, and a wastebasket with a handle and space for bags.

Perforation

The Module 65 module is simply attached with 8 screws to further modules in the Moon Kitchen 2.0 system. Thanks to its modular design, you can extend and convert your kitchen in the vehicle as required...

If you plan to extend your Moon Kitchen 2.0 with further modules, choose to perforate one of the sides. This will provide you with new holes for the installation of electrical, gas, or water installations and reduce the weight of the entire module.

Tourist or stationary fridge?

The 65 module is prepared for the installation of a stationary refrigerator or a touring fridge in the cargo module. To mount a stationary refrigerator, you will need to cut a hole in the right or left side of the 65 module. The best way to do this is to use an aluminum saw blade. See the video opposite for more information.

Modul 55

/kitchen, sink, drawers, shelves/

Module 55 from the Moon Kitchen 2.0 product family is an innovative, bolt-on kitchen module with space for a sink, drawers, or shelves. Made from 90% high-quality, resistant, and lightweight aluminum, Module 55 can be used as a stand-alone piece of furniture that you mount anywhere in your vehicle or as part of a larger kitchen.

Module variants 55

Worktop and sink

Module 55 is available with or without a worktop. The top is made of aluminum-reinforced plywood and finished in lacquered oak veneer. It is possible to install the sink on the right or left side of the module. The sink set does not include a mixer tap.

Front variants

Module 55 is prepared for the installation of three drawers or one drawer and a door or a full door. If a worktop with a sink is chosen, a hinged door shelf is fitted instead of a drawer.

Front colours

Module 55 is prepared for the assembly of three drawers or one drawer and a door or a full door. When choosing a worktop with a sink, a shelf with a hinged door is fitted instead of a drawer.

Perforation

You can easily attach further modules from the Moon Kitchen 2.0 system to the Module 55 with 8 screws. Thanks to the modular design, you are free to extend and convert your kitchen in your vehicle as required...

If you plan to extend your Moon Kitchen 2.0 with further modules, choose to perforate one of the sides. This will give you new openings for the installation of electrical, gas, or water installations and reduce the weight of the entire module.

Modul 40

/kitchen, sink, drawers, shelves/

Module 40 from the Moon Kitchen 2.0 product family is an innovative, bolt-on kitchen module with space for a sink, drawers, or shelves. Made from 90% high-quality, resistant, and lightweight aluminum, Module 40 can be used as a stand-alone piece of furniture that you mount anywhere in your vehicle or as part of a larger kitchen.

Module variants 40

Worktop and sink

Module 40 is available with or without a worktop. The top is made of aluminum-reinforced plywood and finished in lacquered oak veneer. It is possible to install the sink on the right or left side of the module. The sink set does not include a mixer tap.

Front variants

Module 40 is prepared for the installation of three drawers or one drawer and a door or a full door. If a worktop with a sink is chosen, a hinged door shelf is fitted instead of a drawer.

Front colours

Module 40 is prepared for the assembly of three drawers or one drawer and a door or a full door. When choosing a worktop with a sink, a shelf with a hinged door is fitted instead of a drawer.

Perforation

You can easily attach further modules from the Moon Kitchen 2.0 system to the Module 40 with 8 screws. Thanks to the modular design, you are free to extend and convert your kitchen in your vehicle as required...

If you plan to extend your Moon Kitchen 2.0 with further modules, choose to perforate one of the sides. This will give you new openings for the installation of electrical, gas, or water installations and reduce the weight of the entire module.

Module 35

/kitchen, sink, drawers, shelves/

Module 35 from the Moon Kitchen 2.0 product family is an innovative, bolt-on kitchen module with space for a sink, drawers, or shelves. Made from 90% high-quality, resistant, and lightweight aluminum, Module 35 can be used as a stand-alone piece of furniture that you mount anywhere in your vehicle or as part of a larger kitchen.

Module variants 35

Worktop and sink

Module 35 is available with or without a worktop. The top is made of aluminum-reinforced plywood and finished in lacquered oak veneer. It is possible to install the sink on the right or left side of the module. The sink set does not include a mixer tap.

Front variants

Module 35 is prepared for the installation of three drawers or one drawer and a door or a full door. If a worktop with a sink is chosen, a hinged door shelf is fitted instead of a drawer.

Front colours

Module 35 is prepared for the assembly of three drawers or one drawer and a door or a full door. When choosing a worktop with a sink, a shelf with a hinged door is fitted instead of a drawer.

Perforation

You can easily attach further modules from the Moon Kitchen 2.0 system to the Module 35 with 8 screws. Thanks to the modular design, you are free to extend and convert your kitchen in your vehicle as required...

If you plan to extend your Moon Kitchen 2.0 with further modules, choose to perforate one of the sides. This will give you new openings for the installation of electrical, gas, or water installations and reduce the weight of the entire module.

Module 30

/kitchen, drawers, shelves/

Module 30 from the Moon Kitchen 2.0 product family is an innovative, bolt-on kitchen module with space for a sink, drawers, or shelves. Made from 90% high-quality, resistant, and lightweight aluminum, Module 30 can be used as a stand-alone piece of furniture that you mount anywhere in your vehicle or as part of a larger kitchen.

Module variants 30

Worktop and sink

Module 30 is available with or without a worktop. The top is made of aluminum-reinforced plywood and finished in lacquered oak veneer. It is possible to install the sink on the right or left side of the module. The sink set does not include a mixer tap.

Front variants

Module 30 is prepared for the installation of three drawers or one drawer and a door or a full door. If a worktop with a sink is chosen, a hinged door shelf is fitted instead of a drawer.

Front colours

Module 30 is prepared for the assembly of three drawers or one drawer and a door or a full door. When choosing a worktop with a sink, a shelf with a hinged door is fitted instead of a drawer.

Perforation

You can easily attach further modules from the Moon Kitchen 2.0 system to the Module 30 with 8 screws. Thanks to the modular design, you are free to extend and convert your kitchen in your vehicle as required...

If you plan to extend your Moon Kitchen 2.0 with further modules, choose to perforate one of the sides. This will give you new openings for the installation of electrical, gas, or water installations and reduce the weight of the entire module.

We have done everything to make your life easier.

We don't skimp on details and extras. They are what add character and maximise the functionality of the Moon Kitchen 2.0. The Moon Set - or Moon Pocket and Moon Bin - are optional organisers that attach to the hooks on the front of the 65 module. They can be assembled and removed in seconds. What do you get? Even more space - for small kitchen accessories, spices, handy tools, kitchen waste bag. You decide.

We have done everything to make your life easier.

Moon Pack are drawer organisers, perfectly suited to each module and size. The Moon Pack will help organise crockery, plates, bulk items, cups and everything that should be in an expedition kitchen for the van. Moon Packs are equipped with ‘handles’ so that you can successfully take the things you need from the car to the picnic. 

Sekcja o Moon Pack w poziomie

Product Details

Reviews (0)

No reviews
Product added to wishlist